| GLASS
TYPE |
| 10mm Toughened
single glazed |
| 12mm Toughened
single glazed |
| 4/16/4 Toughened
double glazed |
| 4/16/4 Toughened
Double glazed low ‘E’ |
| 6.4/14/4 Laminated
outside, toughened on the inside, double glazed |
| Branded glass
products |
|
Application
Internal or external glassplan frameless
systems, domestic or commercial use.
As above but normally required over 3m high
Standard 24mm unit for Glassplan systems, ‘U’ value
of 3.0
Enhanced thermal insulation through chemical processing of
the glass or use of inert gases in the cavity, ‘U’
value of 1.8 - 0.5
Laminated glass used on the outside to assist where greater
wind loads, resistance to burglar attack or larger sheet sizes
required, 'U' value of 1.1 when Argon filled.
Specifiers are welcome to chose a preferred glass product,
subject tosuitability, for example Pilkington ‘Suncool’
to resist solar gain, or ‘Securit’ laminated toughened
glass for maximum resistance to cracking.
Venetian Blinds
Inside double glazed units
- Internal Blinds can solve the problems of
excessive heat gain during
the day time and privacy at night.
- An ingenious magnetic device allows control
of blinds set inside
sealed units.
|
