Application
Internal or external glassplan frameless systems, domestic or commercial use.

As above but normally required over 3m high
Standard 24mm unit for Glassplan systems, ‘U’ value of 3.0

Enhanced thermal insulation through chemical processing of the glass or use of inert gases in the cavity, ‘U’ value of 1.8 - 0.5

Laminated glass used on the outside to assist where greater wind loads, resistance to burglar attack or larger sheet sizes required, 'U' value of 1.1 when Argon filled.

Specifiers are welcome to chose a preferred glass product, subject to suitability, for example Pilkington ‘Suncool’ to resist solar gain, or ‘Securit’ laminated toughened glass for maximum resistance to cracking.

Venetian Blinds
Inside double glazed units

• Internal Blinds can solve the problems of excessive heat gain during
  the day time and privacy at night.
  
• An ingenious magnetic device allows control of blinds set inside
  sealed units.

Glazing Manifestation
Building Regulations also require
the provision of safety
manifestation to glazing in public
areas. A wide variety of options
are available to suit the style of
the individual design.

• Sand blasted patterns
  
• Applied films
  
• Company logos
  
• Ceramic paints
  
• Client supplied artwork