Glazed folding screens for internal use. Developed using the successful Visioplan detailing, this refined, glazed version throws new light on to an old subject, brightening your prospects by introducing glass into the traditional timber framed panels or the clean, elegant aluminium framed panels. Ideal for Day Centres, Schools and Hospitals.

TIMBER FRAME
A series of custom made, timber framed panels, which are continuously hinged and are easy to operate.

Available either top hung or floor rolling where structural support is not adequate to carry the weight of the panels or when bunching off-centre of the track. Sweep seals are fitted at top and bottom of each panel to enhance the acoustic properties.

A pass door is intergral with a variety of finishes

ALUMINIUM FRAME
These panels are assembled from extruded profiles in white lacquered finish providing clean attractive lines.

As with the timber-framed system, panels are top hung, requiring a floor guide only when using end-folding configuration. Panels are fitted with integral sweep seals at top and bottom edges, and are interconnected by butt hinges. Each alternate panel is secured at the floor with slide bolts engaging into sockets, or the floor guide when using end-folding stacking.

Specification Options

DESCRIPTION:
A series of continuously hinged together panels constructed using timber frames or aluminium extruded profiles with sweep seals at top and bottom.

SUPPORT:
Panels are top hung with stacking options as centre folding or end folding with floor guide.

WALL CLOSING:
In the closed position the end panel (or in the case of a double wing, the centre panel) acts as a full height door with ‘D’ ring handles. The whole wall is flattened out, stabilised and locked in position by key operated shoot bolts on each alternate panel.

PANEL FINISHES:
Timer framed systems are finished in high-density spray paint but choice extends to veneers, laminates, pinboard or primer sheet ready for site decoration. Aluminium framed systems are electrostatically painted white as standard, but other colours available on request. Pelmets are finished in white as standard with matching colours / finishes available on request.

VISIOPLAN - TIMBER
Panel support:   Top hung only
Panel thickness: 61mm
Panel height (max): Up to a maximum of 2.70 metres. (Check panel weight)
Panel width (min): 300mm.
Panel width (max): Centrefold - 900mm. (Check panel weight)
Endfold - 700mm.
Door leaf width (max): 800mm.
Panel weight (max): 180 kg
Glass thickness: 6mm.
   
VISIOPLAN - ALUMINIUM
Panel support:   Top hung only
Panel thickness: 60mm
Panel height: Up to a maximum of 4.0 metres. (Check panel weight)
Panel width (min): 300mm.
Panel width (max): Centrefold - 900mm. (Check panel weight)
Endfold - 700mm.
Door leaf width (max): 800mm.
Panel weight (max): 180 kg
Construction: 60 x 60mm section aluminium profile with 36 x 40mm crossrail profile (if required)
Approx weight (max):   25 kg/m² (with 6mm glazing)
Glass thickness (max):   14mm.
   
VISIOPLAN - INDIVIDUAL PANELS
Panel support:   Top hung on two point suspension.
Panel thickness: 60mm.
Panel height: Up to a maximum of 5.0 metres.
Panel width (min): 1200mm.
Panel width (max): 180 kg
Construction: 60 x 60mm section aluminium profile with 36 x 40mm crossrail profile (if required)
Approx weight:   25 kg/m² (with 6mm glazing)
Glass thickness (max):   14mm.
Stacking options:   Please refer to page 41 for a selection of track layouts which are available.

 

 

©2004 Alco Beldan Ltd Topˆ

Movable Walls LinkTo request your free Movable Walls brochure click here